DAC Universal S | Dentsply Sirona Sweden

Full virucidal efficacy: Reprocessing with DAC Universal S

The sterilization of DAC Universal S is not only bactericidal, mycobactericidal and fungicide but also fully virucidal. Proven full virucidal1 efficacy. Efficacy spectrum with relevant examples:

bactericidal	S. aureus
fungicide	C. albicans
mycobactericidal	TP
virucidal	HPV, HBV, HCV, HIV, SARS-CoV 2, influenza, adenoviruses, noroviruses

1 Tested with temperature resistant parvoviruses.

Switch off infection control risks: Switch on DAC Universal S

Comply with infection control standards at the touch of a button and avoid cross contamination: Completely safe with DAC Universal S. Your patients and employees can rely on this all-round protection and put their complete trust in the treatment with reprocessed and sterilized instruments.

DAC Universal S - Take advantage of the many convenient features

Ease of use

New design, touch display with intuitive user interface, guided maintenance workflow Check & Clean.

Cost-effective and environmentally friendly reprocessing

Low operating and consumption costs – no use of cleaning and disinfection chemicals and only up to 900 ml water consumption per cycle. Low investment costs in instruments thanks to cooling at the end of the process and therefore quick return to service.

Fully automatic reprocessing

Six instruments in approx. 21 minutes; internal and external cleaning, lubrication (if needed) and sterilization of straight and contra-angle handpieces, turbines, ultrasonic / sonic handpieces and tips, nozzles of multifunctional syringes and powder jet devices as well as powder jet handpieces.

Legal certainty

Cleaning and sterilization process which can be validated. Cleaning process in accordance with EN ISO 15883-1 / -2*. Sterilization process in accordance with EN ISO 13060* and ISO 17665-1. Routine Control with chemical indicator class 5 and PCD (Process Challenge Device).

* Does not fully comply with all requirements. Details can be found in the instructions for use, chapter 3.7 "Supplementary information on compliance with EN ISO 15883-1/-2 and EN ISO 13060.

Hygiene at the touch of a button: The fully automated reprocessing process

The DAC Universal S cleans, lubricates (if necessary) and sterilizes up to six straight and contra-angle handpieces and turbines, ultrasonic / sonic handpieces and tips, nozzles of multifunctional syringes and powder jet devices as well as powder jet handpieces in approx. 21 minutes – including cooling.

The fully automated reprocessing process

DAC Universal S - Workflow

Lid variations

Pink Lid

For the reprocessing of straight and contra-angle handpieces, turbines and contra-angle handpiece heads.

Reprocessing of rotating instruments in a single cycle with the Program Blue Lid

DAC Universal S pink lid internal cleaning

Internal cleaning with cold water

1. Preliminary cleaning

2. Leak test

3. Internal cleaning: The internal spray and drive channels are rinsed with water

Fully automated lubrication

4. Lubrication: The drive channels are lubricated (sufficient for the next treatment)

DAC Universal S external Cleaning Pink Lid

External cleaning with cold water

5. External cleaning: Pulse wash procedure (multi-cyclical cleaning method)

Sterilization

6. Heating up to 134°C

7. Back-flush: Saturated steam is directed through the instruments

8. Sterilization: 3 min. at 134°C

Cooling

9. Cooling

10. The lid opens slightly

11. The lid can now be opened fully

White Lid

For the reprocessing of ultrasonic / sonic handpieces and tips, nozzles of multifunctional syringes and powder jet devices as well as powder jet handpieces.